基于TDRSS的低轨卫星定轨方法研究

利用跟踪与数据中继卫星系统（TDRSS）组成天基测控系统对低轨卫星进行轨道确定，并讨论了低轨卫星在TDRSS系统覆盖区域的时间段，以改进的Gauss-Newton算法为基础，设计了非线性迭代的微分轨道改进算法，有效抑制了算法截断误差。仿真实验证明基于TDRSS的测控技术可显著提高测控覆盖率，减少地面测控站压力，有效确定低轨卫星轨道，定轨位置误差小于20m，速度误差小于0．01m／s，能满足一般低轨卫星的定轨精度要求。     

星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

诊断键合图在液体火箭发动机故障诊断中的应用

研究了通过诊断键合图模型建立液体火箭发动机解析冗余关系的故障诊断方法。通过在液体火箭发动机键合图模型中加入观测信号和虚拟传感器的方法，建立其诊断键合图模型，并利用此模型构建了系统的解析冗余关系。提出了根据诊断键合图因果路径并利用解析冗余关系残差趋势分析建立具有残差变化方向故障特征矩阵的方法，使故障特征值能更好地反映故障特征。最后利用仿真数据对诊断结果进行验证和分析，表明该方法建模简单、诊断速度快、准确性高。     

深度节流补燃循环发动机系统稳定性研究

补燃循环发动机深度节流过程中,系统参数大范围变化,低工况时喷注器压降和供应系统节流元件压降较低,容易出现推进剂供应系统与热力组件耦合的不稳定问题。针对10∶1深度节流富氧补燃循环发动机,通过Nyquist稳定性分析方法,对发动机全工况范围内泵后供应系统和燃气系统耦合稳定性进行仿真研究。结果表明:富氧补燃循环发动机燃料供应路与燃气路形成的闭环系统在低工况时,稳定裕度较低,改善燃气发生器喷雾燃烧效果以缩短时滞、增加燃气停留时间、在靠近燃气发生器位置增加供应系统压降能提高系统稳定裕度。     

用预测法量化防空导弹武器系统效能的研究

针对当前分析人员难于求解防空导弹武器系统总体效能值，提出了一套量化系统效能中的系统能力向量Ｃ的方法。对该方法作了详细的论述，并用该方法量度了一些防空导弹武器系统的总体系统效能。分析得到的结果是令人满意的，从而进一步解决了如何通过较理想的效能模型，全面地预测防空导弹武器系统在给定条件下完成规定任务的能力问题。     

圆柱形弹性壳液耦合系统模态的有限元法分析

本文针对圆柱形盛液容器受高频激振产生低频大幅重力波的现象,用有限元法对圆柱形弹性壳体及壳液耦合系统进行了模态分析,得到了壳液耦合系统的主要振型;用有限元法分析所得的模态结果与实验现象及实验模态分析结果有较好的吻合,进一步验证了实验结论的可靠性。     

组网数据处理探讨

讨论了测向定位中双站交会定位及定位误差分析、三站交会定位、多站交会定位若干问题，首次尝试将最小二乘法和递推最小二乘法用于多站测向定位，减少了大量的矩阵求逆，数据利用效率高，可以提高测向定位的精度和简化运算。特别是在存在多径效应的情况下，有利于发现和去除野值。在测向站组网数据的处理和应用上有较强的实用性和推广价值。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.